Titanium water glass casting

Mining machinery investment casting forming generally does not apply pressure, the strength of the equipment and mold requirements are not high, the product specifications are limited to a small, low thermal stress in the product. Therefore, the production investment is low, can produce large products with excellent performance, but the production cycle is long and must be processed after molding. Under the premise of traditional casting, infusion, embedded casting, pressure casting, rotating casting and centrifugal casting are derived.

①Pouring. The difference between this method and casting is that the product after casting is slid by the mold; the mold is part of the product itself.

②Insert casting. Various non-plastic parts are placed into the mold cavity and wrapped in it with the injected liquid material dried and fixed.

③Pressure casting. Mainly used for epoxy casting, which is good for injecting viscous materials into the mold and reducing the mold filling time.

④rotation casting. After the material is injected inside the structure, the mold is heated, dry-fixed and set according to the agricultural machinery investment casting rotates around the double or multi-axis at a lower speed, and the material is distributed by gravity on the inner wall of the mold cavity. It is used to manufacture hollow products such as spherical and tube-shaped products.

⑤ Centrifugal casting. Injecting a quantity of liquid material into a mold that rotates at high speed around two axes and can be heated, and using centrifugal force, the material is distributed to the inner wall of the mold cavity and cured into a tubular or hollow cylindrical product by physical or chemical action (see figure [centrifugal casting]). Single cast nylon products can also be formed by centrifugal casting.